ProductImageProductBest Overall KitVictor Performer EDGE 2.0Check Price via AmazonBest Portable OptionHobart Tag-A-LongCheck Price via NortherntoolBest Portable KitLincoln Port-A-TorchCheck Price via Northerntool

What is a good brand of cutting torch?

ProductImageProductBest Overall KitVictor Performer EDGE 2.0Check Price via AmazonBest Portable OptionHobart Tag-A-LongCheck Price via NortherntoolBest Portable KitLincoln Port-A-TorchCheck Price via Northerntool

Is Victor Torch better than Harris?

Both brands are good but I’d stay with victor for the straight scrapping torches and it’s easier to find parts for them and most shops repair them,harris is good though don’t get me wrong but personally that’s just hear say about the harris torches but i’ve never used harris!

What is the strongest cutting torch?

• Victor Performer 540/510 EDGE 2.0.
• Victor Journeyman EDGE 2.0 540/510 Kit.
• Miller/Smith Toughcut Acetylene Outfit CGA510.
• Harris Ironworker 510 Oxy-Acetylene Torch Kit.
• Victor Medalist 250 540/510.
• Hobart Toughcut 770502 Oxy-Acetylene Kit 540/510.
• ZENY Portable Cutting Torch Kit.

What are the two types of cutting torch types?

There are two types of cutting torches : low-pressure cutting torches and high-pressure cutting torches.

Where are Harris torches made?

Details about HARRIS 16 TORCH HANDLE 1401016 ASSEMBLY MADE IN IRELAND.

What is the hottest propane torch?

#1 Benzomatic TS8000 Propane Torch Maxing out without supplemental oxygen at around 3000º F, this Benzomatic propane torch is the hottest burning propane torch head on our list. This makes it the best propane torch for light welding, brazing and large diameter soldering.

Where are Smith torches made?

In the case of Smith cutting torches, which are made by Miller Electric, you can rest assured that your torch is going to be made in the USA. Welders who have tried out Smith’s torches tend to be very impressed with their construction and performance over time.

What is the difference in cutting torches?

What is the difference between a cutting torch and a welding torch? A cutting torch is used to cut metals into smaller pieces while a welding torch is used to meld and connect different pieces of metal together. In an oxy-fueled cutting torch, there are two oxygen valves while a welding gun uses a single valve.

Are Harris and Victor torches compatible?

Harris Products Group The Harris Victor Compatible Ironworker VHD 510 Oxy/Fuel Cutting Welding Torch Outfit is 100% Victor compatible. The handle will work with all Victor 300 series cutting attachments and rosebuds.

Article first time published on

What is the difference between a positive pressure torch and injector torch?

​An injector (low-pressure) welding torch looks much like a positive-pressure torch. However, the internal construction of an injector torch is somewhat different. The chief characteristic of an injector torch is its ability to operate using very low acetylene pressure.

Which of the following flame is the hottest?

Due to complete combustion, the outer zone is blue in color. This zone is the hottest in temperature when compared to the other zones. This blue colored zone is the non luminous part of the flame. The yellow color region which is the bright part of the flame is the middle zone.

How thick can you weld with oxy acetylene?

The leftward technique of Oxy-Acetylene welding is employed to weld steel plates that are up to 5mm thick. It can also be used to weld non-ferrous metals.

What is a Bernzomatic torch used for?

The TS3500 Multi-Use Torch is a versatile torch well suited to a variety of tasks, including light soldering, lighting grills, loosening rusted bolts and softening putty or paint. It features an automatic ignition that instantly ignites the flame without the hassle of a spark lighter.

Which Bernzomatic torch is the hottest?

The Bernzomatic TS8000BT High Intensity Torch Head is the hottest buring torch in the Bernzomatic line. The Instant On/Off trigger ignition provides easier lighting and increased fuel savings. The Large, Optimized swirl flame burns hotter for maximum heat output that provides a 30% faster soldering time.

How hot does a Bernzomatic detail torch get?

3,100 degrees Fahrenheit flame temperature. Features: Refillable Precision Needle Point Flame Torch. Built-In Push Button Igniter.

Who owns Harris welding?

Tod Hancock – Owner – Harris Welding Supplies | LinkedIn.

What is Victor style torch?

Product Overview. The OLSEN™ VICTOR Style Oxygen/Acetylene Cutting Torch is ideal for wide range of projects from cutting, welding, to heating. This cutting torch delivers smooth cutting action that works with all fuel gases. For cutting, welding and heating. Works with all fuel gases.

Can you use propane for cutting torch?

The gases you can use with oxygen in cutting torches includes acetylene, propane and others. … Acetylene burns much hotter than propane and therefore can cut quicker; but propane is usually cheaper than acetylene and can be used just as effectively in a cutting torch.

Do you turn on oxygen or acetylene first?

OXY-ACETYLENE We recommend closing the oxygen valve first whenever turning off an oxy-fuel torch system especially when Acetylene is fuel.

Should you ever use oil on welding equipment?

Never use oil on welding equipment. Oil and grease may ignite spontaneously, when in contact with oxygen.

Is oxy acetylene welding still used?

In recent decades, oxy acetylene welding has become obsolete. Our modern arc welders have more consistency and weld faster. However, oxy acetylene cutting is still a commonly used process that is utilized by millions of welders every day.

Can stainless steel be cut with a torch?

An oxy-acetylene torch is fairly useless against a good grade of stainless steel. You can melt it away, but oxidation is the key to ”burning” regular steel with an acetylene cutting torch, and stainless is stainless because of alloying metals that make it very oxidation resistant.

What pressure should I set my cutting torch?

The maximum working pressure for acetylene gas when using a cutting torch is 15 psi or 103.4 kPa. If the pressure goes beyond that, if it is used raw, it gets unstable and becomes dangerous. It is a flammable gas and when it becomes unstable, it is at risk of spontaneously combusting.

Is a plasma cutter better than a torch?

Cutting precision: Plasma typically cuts quickly and with minimal slag, providing smooth cuts with a narrower kerf than what’s produced by oxy-fuel torches. … Faster speeds on thinner metals: Plasma can cut thinner metals faster than oxy-fuel can, and with minimal or no metal distortion.

Can you cut cast iron with a cutting torch?

While you can cut cast iron with a plasma cutter torch, torch use is not the best method to cut cast iron. When cutting cast iron, it is best to use a snap cutter, angle grinder, or reciprocating saw.

What happens to acetylene above 15 psi?

Acetylene will not explode under low pressure at normal temperatures. However, it becomes unstable and spontaneously combustible when compressed to a pressure over 15 psi. Beyond 29.4 psi, it becomes self explosive, and a slight shock may cause it to explode even in the absence of air or oxygen.

What gauge pressure should acetylene never be set above?

Never use acetylene at pressures above 15 psi. Using acetylene at pressures in excess of 15 psi gauge pressure (or about 30 psi absolute pressure) is a hazardous practice.

What kind of torch can cut steel?

An oxy-acetylene torch, also known as a blow torch, is a dangerous cutting system, but it’s also a powerful and useful tool if you need to cut steel. By creating a safe work environment and carefully monitoring the pressure of the oxygen and acetylene, you can use an oxy-acetylene torch for any number of projects!

What is the difference between plasma cutting and oxy acetylene cutting?

Plasma cutting is made possible by introducing electricity into compressed air to create an ionized, imbalanced plasma gas. … Oxyfuel cutting is where an oxygen fuel gas flame preheats the material to its ignition temperature, then a powerful oxygen jet is directed at the material.

Is welding and cutting the same?

Welding involves joining two or more pieces of metal together to form a single piece. Molten metal is generated through an intense heat source, such as oxygen and fuel gas or an electrical arc. … Cutting processes include oxygen and fuel gas and electrical arc gouging.