Unit DimensionsINWidth (front)25 in.Width (back)16 in.Height17 in.Depth14 in.

What is the slimmest gas fireplace?

The Langley 36 – Direct Vent Linear Gas Fireplace. A true linear gas fireplace available at builder pricing, at only 8-3/4″ deep for framing, making it one of the thinnest linears on the market.

Do fireplace inserts come in different sizes?

Fireplace inserts are not one-size-fits-all. They must be the right dimensions for your particular space, so measure the height, width and depth of your fireplace from the back wall to the front opening. Use those specs to ensure a proper fit.

What sizes do gas fireplace inserts come in?

• Small: 10-18,000 BTU – up to 800 sq. ft.
• Medium: 25-30,000 BTU – up to 1400 sq. ft.
• Large: 35-40,000 BTU – up to 1800 sq. ft.

What is the difference between a gas fireplace and a gas insert?

A gas insert is installed within an existing masonry, wood burning fireplace. A gas insert is smaller than a gas fireplace to allow it to fit inside of the opening of an existing wood burning fireplace. … A gas insert can get much hotter on the outside (no, not that hot) than a gas fireplace.

What is the average width of a gas fireplace?

Typical Gas Insert Sizing Most fireplaces, whether gas or wood burning, typically have openings that are nominally 36 inches or 42 inches wide.

What is a zero clearance fireplace insert?

Zero-clearance fireplaces are pre-manufactured fireplaces that can be installed almost directly against combustible materials like wood, walls, or panelling. The construction and materials of the firebox do not allow the outside temperatures of the firebox to affect those materials and do not require a hearth.

Can you put a fireplace insert in an existing fireplace?

Yes, you can easily add a gas fireplace insert into your existing chimney. In fact, a fireplace insert is an appliance designed to fit into an existing fireplace. Inserts are usually cut in various sizes to suit your preferences and needs.

How do you measure a gas insert?

1. Measure the front opening of your fireplace.
2. Measure the back width of your fireplace.
3. Measure the depth of the floor from back wall to the front of your fireplace.
4. Measure the inside height of the fireplace from the floor to the lowest point inside the fireplace.

Are gas fireplace inserts worth it?

A gas fireplace offers a range of benefits over burning wood in your home, including the ability to instantly turn on, control and turn of the heat from the fire. The advantages of having gas fireplace can outweigh the disadvantages in many scenarios, making a gas fireplace a worthwhile investment for your home.

Article first time published on

Can I install a gas fireplace insert myself?

To make this upgrade to your existing fireplace, you can install a gas fireplace insert. Since this process requires working with vent pipes, electrical, and the gas supply, we recommend working with a professional instead of doing it yourself.

What is the average cost of a gas fireplace insert?

A gas fireplace inserts costs about $2,000. The price of installation runs from $2,300 to $10,000, depending on factors like personal style, extra gas plumbing and necessary duct work. Need a fireplace taken out? The cost to remove a fireplace or chimney ranges from $4,000 to $10,000.

How do I know if my fireplace has zero clearance?

The most obvious way of identifying a zero clearance fireplace is the existence of black metal, either exposed on the face or inside the firebox (Fig. #6). Some fireplace manufacturers are doing a better job of hiding the metal and making fireplaces that look more like masonry (Fig. #7).

Are gas fireplaces zero clearance?

What Is a Zero Clearance Gas Fireplace? … Zero-clearance fireplaces are an exception. They feature fireboxes made of materials (primarily metal) that reduce temperature buildup. Since they don’t heat up the surrounding area, it’s possible to place them close to combustible materials, such as walls or wood.

Is a gas fireplace a zero clearance fireplace?

Zero-clearance fireplaces can be fueled by firewood, natural gas, propane, or pellets.

What is the typical width of a fireplace?

The average fireplace has the following dimensions: An opening that’s between 24-36 inches wide, 24-29 inches high, and 16 inches deep. On average, the distance between the hearth and the damper is about 37 inches. The fireplace’s rear firebox is generally between 11-19 inches wide, with a height of 14 inches.

What size is a gas fireplace?

Typically, gas fireplaces are classified into four sizes – small, medium, large, and extra-large. As a basic benchmark, a small gas fireplace will heat less than 500 sq. ft., a medium gas fireplace will heat between 500 – 1,000 sq. ft, a large gas fireplace will heat between 1,000 – 2,200 sq.

What is a good width for a fireplace?

A 36″ or 42″ fireplace opening width is more common, but you need to assume about 18″ on each side for a typical non-combustible surround and wood mantel, 24″ on each side for something more grand.

What is the minimum depth of a standard masonry fireplace firebox?

The firebox of a concrete or masonry fireplace shall have a minimum depth of 20 inches (508 mm). The throat shall not be less than 8 inches (203 mm) above the fireplace opening. The throat opening shall not be less than 4 inches (102 mm) in depth.

How efficient are fireplace inserts?

The closed combustion system of a fireplace insert can be 60-80% efficient.

Do you need a chimney for a gas fireplace insert?

gas inserts is that a built-in gas fireplace doesn’t require an existing fireplace or chimney. So, if you don’t have an existing wood-burning fireplace, this is your only option. … Vented gas fireplaces exhaust the air through an exterior opening in your wall.

What is a direct vent gas insert?

Direct vent gas inserts use a high temperature glass panel to separate the burning area of the gas insert from the inside of your home. So, your vented gas insert will take air in from the outside and then exhaust all the gases to the outside. This contrasts with a vent-free gas insert, which vents into the home.

Can you put a gas insert in a wood burning fireplace?

Yes, you can convert an existing wood burning fireplace to gas, but it must be that – an existing wood burning fireplace. Wood burning appliances, such as wood stoves, cannot be converted to gas.

Do gas fireplaces use a lot of gas?

In short: Gas fireplaces are quite inexpensive to run. This is primarily due to the low cost of natural gas and propane. On average, 100,000 BTU worth of heat costs $1.09 if you use natural gas and $3.87 if you use electricity.

How much does it cost to put in a fireplace insert?

Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.

How much does it cost to add a gas fireplace to an existing fireplace?

Since an insert is placed directly into a fireplace that is already installed in your home and uses the same chimney, the cost of installing a gas fireplace insert is comparably low. Purchasing a gas fireplace insert should cost you around $1,200. Having the unit installed can cost you around $500-$3,500.

How long does it take to install a gas fireplace insert?

Propane marketers who do HVAC work already handle gas appliances and venting and are ready to install this solution. Installation of a direct-vent gas fireplace insert takes a crew of two people four hours.

Can you put drywall around a gas fireplace?

This homeowner renovated his fireplace and put sheetrock or drywall up around the front of his fireplace. Unfortunately, this is highly flammable and is not an appropriate or safe fireplace surround.

Is vented or ventless fireplace better?

Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.

Are ventless gas fireplaces safe?

Are Ventless Gas Fireplaces Safe? Ventless gas fireplaces emit dangerous and noxious gasses into the room they are operating. … Ventless fireplaces produce small amounts of nitrous dioxide and carbon monoxide which can be deadly in large doses.

How much is a ventless gas fireplace?

A vented gas fireplace costs between $3,500 and $8,000 to purchase and have installed, depending on the amount of carpentry required to run the ductwork. By contrast, a ventless fireplace costs between $1,000 and $5,000.