#15 or #30 Felt underlayment.Asphalt shingles.Drip edge.Hook blades.Roofing nails.Sealant.Self-adhesive waterproof underlayment (“ice and water shield”)Staples.

What are 3 materials you would need to replace a roof?

• Roof decking. Decking is the wooden boards that make up the framing of your roof. …
• Roof flashing. Roof flashing is metal placed anywhere your shingles butt up against something, such as a wall, chimney, or in open valleys. …
• Underlayment. …
• Drip edge. …
• Ice and water shield. …
• Asphalt shingles. …
• Ridge capping. …
• Roof vents.

What are the steps to re roofing a house?

1. Identify Local Building Codes and Obtain Permits. …
2. Find The Roofing Material You Need. …
3. Remove Old Roof (for Pre-Constructed Roofs) …
4. Install Drip Molding and Flash Roof Valleys. …
5. Use Chalk to Mark Nail Spacing. …
6. Apply Roof Adhesive on Exposed Nails. …
7. Let Dry and Enjoy Your New Roof.

What do I need to re shingle a roof?

1. Pry off old roof shingles with pitch fork.
2. Nail down loose roof sheathing to rafters.
3. Cover roof deck with 30-pound felt underlayment; staple felt every 6 to 8 inches.
4. Nail drip-edge flashing to lower edge of roof.
5. Snap vertical chalk line down center of roof.

What are the 5 major roofing materials types of roofing material?

• Asphalt Shingles. This is the most popular residential roofing shingle used today. …
• Metal. Many types of metals are used for today’s roofing needs including steel, zinc, aluminum, and copper. …
• Slate. …
• Clay Tiles. …
• Wood Shake. …
• For more information about roofing materials.

What underlayment to use for shingles?

What Is Roofing Underlayment? Roofing underlayment is what lies between the shingles and the roof sheathing, or roof deck, which is typically either plywood or OSB. It’s installed directly on the roof deck and provides a secondary layer of protection from the elements, including rain, snow, and wind.

How do I estimate the cost of a new roof?

According to HomeAdvisor, the typical range for roof replacement costs is between $5,100 and $10,000, but roof replacement can be as low as $1,200 or as high as $30,000. Many roofing companies will charge between $3.50 and $5.00 per square foot.

Can I replace my roof myself?

The truth is, anyone can replace their own roof, with the help of the many DIY websites. For residential houses, roof replacements typically take two days – the first day to remove the old roof, and the second day is to install the new one. A day or two more can be necessary depending on the size of the roof.

What is the cheapest way to replace a roof?

While asphalt is the cheapest roofing material, there are 3 different types of asphalt shingles that vary in price and affect how much you’ll spend on your roof replacement. 3-tab shingles are the cheapest of the 3 types of asphalt shingles and are a great option for a tight budget.

How long does it take to reroof a house?

In general, the roof of an average residence (3,000 square feet or less) can be replaced in a day. In extreme cases, it could take three to five days. Depending on the weather, complexity, and accessibility of your home it could even take up to three weeks.

Article first time published on

What type of roofing is best?

Asphalt Roofing Shingles Relatively lightweight, inexpensive, and easy to install, asphalt shingles are the best choice for most houses. They come in sheets that are layered on a roof to give the illusion of more expensive single shingles, such as cedar and slate, that are installed one shingle at a time.

How many layers of shingles can you put on a roof?

Most building codes allow up to two layers of organic or fiberglass asphalt shingles. That limit pertains to roofs with up to a 4:12 pitch. When it’s time to replace your roof, there are several factors that might lead your roofing professional to recommend adding shingles on top of your existing layers.

Which tool is used for roofing?

The basic tools used in roofing are: a utility knife, a tape measure, a hammer, and a chalk line. A utility knife is used for cutting roofing material. A specialized roofer’s utility knife has a knob that turns to open the tool — eliminating the use of a screwdriver to open and close the tool.

What are the 4 types of roofs?

• Gable Roof. This roof type is known for its distinguishable triangular shape feature. …
• Mansard Roof. This roof type was adapted from the French and has a much steeper lower slope. …
• Flat Roof. This roof type may not be entirely flat but have a low-sloped pitch that makes them appear flat. …
• Hip Roof.

Which roofing material is the most durable?

• Asphalt Shingles. One of the most common and popular roofing materials, asphalt shingle roofing is highly favored because of how cost-effective it is without compromising protection. …
• Metal. …
• Clay Tile. …
• Wood Shake. …
• Slate.

How do you quote a roofing job?

1. Get Clear On the Scope of Work.
2. Measure the Roof.
3. Estimate the Material Cost.
4. Estimate Labor Costs.
5. Calculate Your Overhead Costs.
6. Tally All Costs.
7. Add Your Markup for Desired Profits.
8. Create and Send Your Roofing Bid.

How much does a 1600 sq ft roof cost?

The average roof replacement cost is $4,200-6,600 on a 1,600 sq. ft. ranch house using asphalt roof shingles. However, if you use premium materials such as metal, wood shingles, clay tile, etc, the cost of your roof will be at least $9,500 – 16,000.

How much does it cost to reroof a 1700 square foot house?

It will cost anywhere between $6,000 to $9,000 to replace a typical 1,700 square foot asphalt shingle roof. Roofing companies charge an average of $3.50 to $6.00 per square foot for asphalt roof replacements.

Do you need paper under shingles?

No matter what type of asphalt shingle you are using, whether traditional or more robust styles (such as under premium designer, architectural and performance shingles) it is recommended to use a underlayment.

Do I need a membrane under shingles?

The underlayment on a roof is a membrane that is applied to the plywood or ‘deck’ of your roof as an extra layer of water penetration protection before your shingles are installed. … Underlayment isn’t always necessary, but should be applied to low-sloped roofs, as well as specific high water risk areas of your home.

What is the purpose of felt paper on a roof?

It serves as a water repellent when heavy rain and storms can cause moisture to get trapped between the shingle and wood of your roof decking. Humidity is terrible news for any roof causing water damage, leaks, or even mold. The felt helps keep water away from the wood, so it doesn’t leak into your attic and home.

What is the best month to replace a roof?

Fall is considered the best season to replace your roof! Changing seasons can largely impact many factors of your roof replacement – rain, snow, heat, humidity. These weather conditions could also affect how quickly your job can be completed.

What is polymer roofing?

In short, polymer roofing is made from the same stuff that has gotten so popular for decks, also known as composite decking. Most polymer roofing is made by melting down recycled plastics, thus keeping all that material out of landfills and oceans and putting it to good use!

Can you pay monthly for a new roof?

2. Roofing company payment plans. Some roofers offer payment plans to help make the roof replacement cost more affordable. With this option, you can spread out your payments over the course of several months or even years.

Will insurance cover a DIY roof?

Liability and Insurance Your home insurance will likely not cover any damage you do to your roof by walking on it or repairing it without proper knowledge and skill. … When they do, they typically have insurance that will cover any damage they may have caused to your roof, or other property.

Is it hard to shingle a roof?

Laying down shingles isn’t really very complicated, as long as you have the right tools and the slope of the roof isn’t too insane. If you’ve got a small area to cover, it’s a reasonable project to take on. But forewarned: it’s hard work.

How much does it cost to replace a roof on a 1300 sq ft house?

House by Square FootAsphaltTotal Cost1,200$4,320$6,2761,300$4,680$6,7991,400$5,040$7,3221,500$5,400$7,845

Is it OK to put a new roof over an old one?

The answer is yes, you can lay new roof shingles over old ones. … You can’t do it with wood or slate, for example, and you should never mix materials, such as laying asphalt shingles over cedar shakes. Also, the old roofing has to be in pretty good condition.

What is the lifespan of a roof?

Slate, copper and tile roofs can last more than 50 years. Homeowners with wood shake roofs should expect them to last about 30 years, while fiber cement shingles last about 25 years and asphalt shingle/composition roofs last about 20 years, the NAHB found.

Do roofers need to come inside?

Do roofers need to come inside? Any professional roofing company with an emphasis on quality services will need to come inside to perform a complete roof inspection. Without inspecting the interior of your roof, you could miss critical warning signs of water leaks and damage.

What does a bundle of shingles cost?

TypePer Square*Per Bundle**Asphalt/Composition$100 – $150$30 – $50Metal$300 – $1,800$100 – $6003D/Dimensional$480$160Cedar/Wood$480$160