A bath and shower diverter is a device that diverts the flow of water either toward the tub spout (i.e., to the bathtub) or toward the showerhead. This product is commonly found in bathtubs equipped with a showerhead, such as in residential bathrooms and private commercial restrooms found in hotels.

What is a bathtub faucet diverter?

If you have a shower-tub combination in your bathroom, the shower diverter valve is what allows you to divert the water back and forth between the tub faucet and the showerhead. Though they are typically very simple devices, shower diverters may malfunction and need replacing once in a while.

Where is the shower diverter located?

Single-Valve Shower Diverter: This diverter valve, also known as a tee diverter, is located on the end of the tub spot. Activating it is simple as a person simply pulls up on the diverter which then sends water to the showerhead.

What is faucet diverter?

The diverter inside your kitchen faucet redirects the water from the faucet spout to your faucet sprayer when you press the sprayer trigger. When you squeeze the trigger, the water pressure drops to engage the diverter. This stops the water flow at the spout and moves it to the sprayer.

What is the purpose of a diverter valve?

A diverter is a small handle made for the shower used to direct the flow of water from the shower valve to any one of up to three possible outlets, so if you plan on only using one with only 2-fixtures, a brass plug must be used to cap the third water outlet.

What does a shower diverter look like?

The diverter looks like a pin pulled upward from the bathtub faucet spout. It’s possible that it may come in the form of a third handle or a button that needs to be pushed or pulled. Either way, when the valve is activated, it engages a rubber stopper, which causes the water to flow in a different direction.

How long does a shower diverter last?

The valves are easy to move against pressure. Control the volume from off to full on by leaving them set to the same temperature. The system costs about $30 to replace, but they last for 20 to 30 years.

Why does tub faucet leak when shower is on?

A leaky shower diverter. A diverter may be an unfamiliar term. The diverter is a valve in your tub’s faucet that diverts water from the tub to the showerhead when the lever is pulled to turn on the shower. A small amount of water dripping out of your tub’s faucet is normal because the valve doesn’t have a perfect seal.

How does a slip on tub spout work?

A slip-fit spout has an internal assembly that slips over a copper pipe. The spout has an opening on the bottom side where a setscrew is tightened to hold the spout onto the copper pipe. A slip-fit spout does not contain threads.

How do I know if my diverter valve is faulty?

A diverter valve may be faulty if the hot water taps still work while the radiators do not turn on. Another sign of a faulty diverter valve is if you only can only get lukewarm water from your taps.

Article first time published on

Why is my shower diverter not working?

The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.

What is a tub valve?

These valves allow you to set the water temperature without having to balance the hot and cold water manually. … These valves change the flow of water to different fixtures — such as from the tub faucet to the shower head or from the fixed shower head to a hand-held shower head.

How do you fix a shower diverter valve?

1. Turn off the water supply to your shower.
2. Seal off your drain with tape so that small screws or other important parts are not lost down the drainpipe.
3. Tighten the screws behind the faceplate of the diverter valve. …
4. Disassemble the shower diverter. …
5. Replace the diverter.

How do you install a shower tub faucet?

The quickest and most basic way to add a shower is a slip-on attachment. These can be used with any type of tub, and feature plastic or rubber connectors that fit over your existing spout, redirecting water through an attached hose to a handshower; nothing gets opened up or removed.

What is a 3 way shower diverter valve?

3. Three-way Diverter Valve. This type of diverter valve allows you to divert the flow of water between three different outputs. For instance, you could switch between a tub faucet, a showerhead, and a handheld. … You can send all of the water to a single output, for example, the showerhead.

What happens when a shower valve goes bad?

There are a few ways to tell if your shower cartridge has gone bad: Dripping or running water when you turn your shower off (most common) Difficulty turning the shower handle, which worsens over time. Shower handle gets stuck or “slips” and doesn’t turn on the water.

How long do shower valve stems last?

A properly installed shower valve should serve you well for a long time. Even if you live in an area with hard water that causes limescale build-up in your appliances, you can expect to have a shower valve work well for about four or five years.

Why does a shower valve fail?

There are several reasons why the cartridge may have failed; the number one cause is an in-balance in water pressure between the mains cold pressure and the heated hot water(and this is very common). This constant in-balance between the two will cause damage to the cartridge which is housed within the valve.

How much does it cost to replace a tub diverter?

National average cost$400Average cost range$225 to $575

How do you replace a tub slipping faucet?

Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don’t loosen any pipe connections inside the wall. Then slide on the new spout and tighten the setscrew.

Can I use a slip on tub spout on a threaded pipe?

A threaded tub spout vs a slip on tub spout is manufactured to screw onto a threaded nipple that is attached to the copper pipe that comes from the wall. … If the copper pipe is too long, cut it down and replace the nipple.

Can a tub faucet leak behind the wall?

It can wick up a wall, it can run along a stud or a beam and end up in a completely different spot. … One of the tell-tale signs of a water leak coming from a shower valve behind the wall is water stains. If you have an upstairs bathroom, you may notice dried water stains on the ceiling below the shower.