The “crown” of the staple is the part that still shows after you punch a staple through the materials you are fastening together. The “legs” are perpendicular to the “crown,” and parallel to each other, and they penetrate the materials. Staple crowns come in narrow, medium, and wide versions.

What is the difference between a stapler and a crown stapler?

It’s important to note, that the gauge and crown of staple are two different things. The gauge is the thickness of the staple, whereas the crown is the width. Medium Wire: Medium wire staples are generally measured in the 18 – 19 gauge range of thickness.

Why is it called a crown stapler?

Crown Stapler Overview Crown staplers, as the name might suggest, use staples to fasten things together. The “crown” refers to the top part of the staple between the two longer legs, which penetrate the material to be joined together.

What are crown staples used for?

Crown staplers are great for upholstery, allowing for a tight stretch of fabric. They fasten fabric to wood on the bottom of chairs and couches, where the staple goes unseen. Staples drive deep and hold firmly, but they can damage wood and leave visible holes when removed.

What is a staple crown size?

Crown measurements typically range from 3/16” for projects like molding or trim, where the staple shouldn’t be noticeable, to 1” when visibility isn’t an issue and a heavy-duty hold is needed, such as installation of wire lathing or roofing shingles.

What size are narrow crown staples?

-Type: Plain Staple. -Wire Size: 18 gauge, 0.0480 in. Dimensions: -Staple Width: 1/4 in.

Are t50 staples narrow crown?

These staples are made from durable 16-gauge stainless steel and feature a 3/8-inch crown size. Designed for use with Arrow, Powershot, Craftsman, Black and Decker, Stanley, Ace, and other narrow-crown heavy-duty staple guns.

Do staples hold better than nails?

Staples can offer superior finishing for projects where nails may not be the right fit. If your project requires quality power for holding two pieces of material together, staples are the way to go. They provide a strong visible grip that will last.

Can you use brad nails for crown molding?

Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. … For 3” rise or less crown moulding you won’t need to mark out the studs, as you will nail into the top plates.

What do you use a 1/4 crown stapler for?

Crown Air Stapler is ideal for all general purpose wood fastening. The lightweight, narrow body tool is easy to handle, making it ideal for installing trim in tight areas. The air stapler has 100 staple magazine with an easy-clear front nose hatch. Drives 18 gauge, 1/4 in.

Article first time published on

What is an 18 gauge narrow crown stapler used for?

The 18 Gauge 1/4 Inch Narrow Crown Stapler (N3804AB3) features a non-slip grip trigger and ergonomically designed simple flip actuation switch. It is ideal for internal and external trim work, furniture, cabinetry and other fine finish work.

What is a wide crown stapler?

wide crown stapler is specifically designed for heavy-duty stapling applications such as lathing, stucco, roofing, sheathing, truss assembly, foam board insulation, house wrap, fencing, furniture framing, pallets, cabinet frames, and general construction.

How do I know what size staples to buy?

Most staplers will say on the bottom what size staple they take, so before you make a purchase, check the bottom of your stapler first. Often, the size will appear in the metric, two-number form, for example, 23/6.

How do you know what size staples to buy?

The default rule is that the staple should be three times longer than the thickness of the material. When fastening hard wood, the staple should be twice as long as the thickness of the wood.

How wide is a medium crown staple?

As for the medium crown stapler, it is used for more rough construction applications where more holding power is required from the staple. The staple is wider (either 7/16″ or 1/2″) than the narrow crown and the wire gauge is thicker (16 gauge).

How thick are T50 staples?

MaterialSteelStaple sizes6 mm (¼”), 8 mm (5/16″), 10 mm (⅜”), 12 mm (½”), 13 mm (17/32″), 14 mm (9/16″)Pack sizes1250, 5000Crown typeFlat

Will T50 staples rust?

Arrow Fastener T50 3/8-inch crown monel rustproof staples (1000-pack) are designed to resist rust when used in high-moisture environments. These staples are made from durable monel rustproof steel and feature a 3/8-inch crown size.

What is the gauge of T50 staples?

Leg x 3/8 in. Crown 18-Gauge Galvanized Steel Staples (1,250-Pack)

What size staples are used for carpet?

We chose 1/2” staples because they provide the 3/16 – 1/4 inch penetration needed to firmly secure our carpet to the hard wood steps while still firing flush. We fired a staple about every 4 inches along the back and sides of the runner.

What size staples does a staple gun take?

Light duty staple guns load three sizes of staples: 1/4, 5/16- and 3/8-inch staples. Since the heavy duty stapler can handle a greater variety of staple sizes, it might seem that there’s really no need for the light duty model. There are, however, other factors to consider beside staple capacity.

What is a medium crown stapler?

Medium crown construction staplers are designed for applications including floor decking, roof sheathing, soft wall sheathing, subflooring, pallet building, vinyl siding and insulation.

Do you glue crown molding?

It is important to put an adhesive (Loctite’s Power Grab, PL Premium, etc.) on both edges of the molding (ceiling and wall) and on the seam between each piece. This helps to hold the crown molding up during installation and, more importantly, will prevent the crown molding from ever separating.

What type of nail gun is best for crown molding?

A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.

Whats the difference between a brad and a finish nail?

Finish nails, or finishing nails, are generally made of 15- or 16-gauge steel wire, making them slightly thicker in diameter than brad nails. … Because they are thicker than brad nails, finish nails are more likely to split thin or delicate pieces of wood trim.

Is there a difference between a nail gun and a staple gun?

The main difference between staple guns and nail guns is in the type of fastener they fire into the materials being joined. … The crown remains visible after the staple is applied, while the legs drive down into the materials to hold them together.

What are the different staple sizes?

Common sizes for the home and office include: 26/6, 24/6, 24/8, 13/6, 13/8 and No. 10 for mini staplers. Common sizes for heavy duty staplers include: 23/8, 23/12, 23/15, 23/20, 23/24, 13/10, and 13/14. Stapleless staplers cut and bend paper without using metal fasteners.

What is the widest crown stapler?

Fastener TypeWide Crown, 1 in. StapleMagazine Capacity157 StaplesMagazine LoadingTopAir Inlet1/4 in.Operating Pressure70 – 120 PSI

What size staples do you use for upholstery?

20 and 22 gauge staples are the most common staples for upholstery. #7 series staples 22 Gauge, #8 (80) series staples 20 Gauge, and T-50 series staples 20 Gauge are commonly used for these applications.

What size are Type 5 staples?

Length: 6mm. Width: 9.5mm.

Are staple gun staples universal?

The right staples aren’t necessarily determined just by the manufacturer. … Check your stapler or staple gun to see what size staples you need. If you find those at your local Westlake and they’re made by a different manufacturer, they should still work fine.