Step 1 – Open jaws. Open the jaws of the clamp by pushing the lever away from the handle. … Step 2 – Place clamp. Place the jaws of the clamp on to the workpiece, with one jaw on either side.Step 3 – Adjust pressure. … Step 4 – Close jaws.

How do you use a locking clamp?

1. Step 1 – Open jaws. Open the jaws of the clamp by pushing the lever away from the handle. …
2. Step 2 – Place clamp. Place the jaws of the clamp on to the workpiece, with one jaw on either side.
3. Step 3 – Adjust pressure. …
4. Step 4 – Close jaws.

What is the purpose of a needle nose pliers?

Needle-nose pliers are used to manipulate wire using the textured teeth. When working with this tool, the handles should be gripped tightly yet apply gentle force. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.

What is a locking wrench called?

Locking pliers (also called Vice-Grips, a vice grip, or a Mole wrench) are pliers that can be locked into position, using an over-center toggle action.

Why are mole grips so called?

In the 1950s Thomas Coughtrie patented his own version of the locking pliers and called them ‘Mole grips’. … The name stuck and the tool became extremely popular with mechanics and engineers across the UK.

What are C clamp pliers used for?

C-Clamps or sometimes referred to as G-Clamps, are used to hold materials in place, usually wood or metal. These clamps are used in many industries such as carpentry, welding, automotive and more. C-Clamps have been used in wood working for quite awhile, they help hold pieces steady.

Why should you be careful when loosening or tightening fasteners with an air wrench?

When loosening a lug nut you’ll notice the socket attached to the impact wrench moving slowly as the lug nut is loosened and then quickly when it’s loose. Be cautious when tightening lug nuts using an impact as it’s easy to over torque them—which can stretch or even strip the threads.

How much PP does Vice Grip have?

TypeNormalCategoryPhysicalPP30 (max. 48)Power55Accuracy100%

What is a vice tool?

vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.

What does Vice Grip garage do for a living?

He is working as a YouTuber known for posting content on the Vice Grip Garage.

Article first time published on

How does a mole wrench work?

Mole grips/locking pliers use levers (the handles) and multiple pivot points to expand and contract the jaws in direct proportion to the amount of force applied to the handles. This means that they are able to mechanically multiply the force applied to the lever by as much as tenfold.

How do you unlock a locking clamp?

1. Open the pliers up completely. …
2. Locate the plier mouth adjustment bolt. …
3. Place the gripping mouth on the object to size for adjustment. …
4. Squeeze the handles together until you hear a click. …
5. Push the locking plate down flush with the handle to unlock the pliers.

How are locking pliers measured?

The size is the measurement between the jaws when they are fully extended. When you open the locking pliers, the distance from one jaw tip to the other is the size of that particular tool. For example, five-inch locking pliers will have jaws that open up to five inches.

What is a welding clamp?

Welding clamps are metal sheet or leg holders that temporarily hold two pieces of materials together tightly. This makes it easier for welders to run the arc and weld the pieces together without worrying about movements in the sheets. The clamps enable you to weld pieces together in a tight alignment.

Why do plumbers use channel locks?

Channel lock pliers, named after the American company that produces them – Channellock — are used for grabbing and pinching things. … In addition, channel lock pliers are useful for various household tasks such as plumbing and electrical repairs and repairing outdoor furniture.

What does a channel lock do?

Features. Channel locks, like any set of pliers, can be used to grip and crush items, such as crimping the end of pipes or other metal objects.

Why is it called a channel lock?

The company’s chief engineer, Howard Manning, developed the tongue and groove plier, which, at the time, was a completely new concept for adjustable pliers. The company patented the plier and branded it CHANNELLOCK®.

What does a vice grip look like?

Common vice grips look like a heavy-duty set of pliers. … Sometimes called mole grips, or locking pliers; a set of different sizes and types of this tool is a valuable addition to anyone’s toolbox.

Are long nose and needle nose pliers the same?

Long nose pliers – also known as needle-nose pliers, these are similar in functionality to linesman pliers, with the added bonus of allowing the user to reach into tight spots due to the long, tapered jaws. … Water pump pliers are used to hold objects of various sizes, and bend wires.

What are mole grippers?

Mole grips are metal pliers that can be locked into place. They are usually made of hardened steel. The upper jaw and handle which is fixed while the lower handle and jaw is adjustable. … Sometimes known as a vice grip or locking pliers, they are useful for removing rounded nuts.

Why is each end of an open end wrench set at an angle?

The ends are generally oriented at an angle of around 15 degrees to the longitudinal axis of the handle. This allows a greater range of movement in enclosed spaces by flipping the wrench over. … The twelve-point fits onto the fastening at twice as many angles, an advantage where swing is limited.

Do I really need an impact wrench?

For instance, you should definitely purchase an impact wrench if you work in an auto repair shop or if you’re in charge of maintaining machinery. The high power of the impact wrench allows you to easily take out or tighten bolts used in trucks or cars.

What is a quick grip clamp used for?

The quick grip clamp can be used with one hand to lock and release on your project. They are commonly used for gluing woodworking joints, gluing wood panels and at home DIY projects.

What is the difference between C-clamp and bar clamp?

A “C-clamp” (also called a G-clamp) is shaped like the letter C and is smaller than an “F-clamp” (also known as a bar clamp), which—not surprisingly—more closely resembles the letter F. The F-clamp opens significantly wider than a C-clamp, so you can use it with larger objects.

Why is it called a C-clamp?

Often believed that these clamps are called “C” clamps because of their C-shaped frame, or also often called C-clamps or G-clamps because including the screw part, they are shaped like an uppercase letter G. … However, in fact, they were originally called a carriage maker’s clamp, or Carriage Clamp.