Place front and back right sides together. Pin the shoulder seams, making sure to tuck the faux fur in as you pin.Sew with at least ¼” seam allowance. I used a 3.0 stitch length. Then serge the seam allowance to clean up the edges.

How do you attach fake fur to fabric?

1. Lay Out the Faux Fur. Look at the right side of the faux fur fabric first, and notice in which direction the fur naturally falls. …
2. Mark the Faux Fur. …
3. Cut the Backing With a Craft Razor or Scissors. …
4. Pull Apart the Fur Fibers and Comb the Fur. …
5. Sew the Fur. …
6. Comb the Sewn Seam.

What is a hinge stitch?

Knit fur backings can be sewn with a “hinge seam,” meaning the fur is cut with no seam allowances and sewn edge to edge with a zigzag stitch.

What needle do you use to sew faux fur?

As you would with Cuddle® minky fabric and terry cloth, always use a heavier needle and a walking foot when sewing with faux fur. We recommend using a 110/18 or 100/16 universal needle, and polyester or poly-cotton blend thread. Note that when using a walking foot attachment, be sure to use a ½” seam allowance.

How do you pin faux fur?

Once you have all your pattern pieces cut out, it’s time to pin. I recommend using Wonder Clips to pin your two pieces together. They do a really good job of securing the pieces, and keeping the fur from popping back up. Regular pins slipped out, and didn’t hold the hairs down in the seam.

Can you Serge faux fur?

Serge your seams. A serged seam is going to do double duty on faux fur. It’ll keep the inside looking pretty and it’ll keep the fluffy nonsense out of your way.

Can you use interfacing on faux fur?

Interfacing / Underlining: This will depend on the fur and the pattern; most faux fur ends up being so warm that no underlining is needed. … A sew-in interfacing is probably best; you can work on practicing patience as you hand-stitch it in. Lining: A mid-weight lining fabric is best.

How do you stop faux fur from shedding?

You either dry clean them or spot clean them then use a fur brush on them. There are also professional fur cleaners you can bring it to. If you’ve already done it then make sure it’s dry and brush it using the fur brush.

How do you add a lining to a pattern?

MAKE THE LINING: Stitch and neaten bust darts, make back darts, close and overlock side seams together. Close shoulder seams and overlock open. Double turn hem lining: Press up the hem 1.5cm, and then fold up the hem again so raw edge meets your pressed line, and press in a second line.

How do you quilt with faux fur?

Lay your pieces of faux fur down on the floor and cut them down to two large rectangles and two smaller rectangles that fit together to create a large rectangle. PRO TIP: Using a quilting square to draw directly onto the back of the faux fur will be easier than cutting a paper pattern to use!

Article first time published on

Can you sew fur with a regular sewing machine?

You can sew fur pelts together by hand or using a sewing machine. You will just need a few special crafting tools and materials to get started. By connecting a few large pelts or several smaller pelts, you can make an attractive fur throw or rug.