Mix 0.9 gram of SEDGEHAMMER in one or two gallons of water to treat 1,000 square feet. Add 2 teaspoons (1/3 fluid ounce) of non-ionic surfactant per gallon of water. Apply as a directed spray to the soil surface around ornamental plants.

How much surfactant do I add to SedgeHammer?

Add 2 teaspoons (1/3 fluid ounce) of a nonionic surfactant per gallon of spray solution. Mix or shake thoroughly for at least two minutes to ensure that the water- soluble bag and ingredients are completely dispersed. Occasionally shake the spray solution while spraying to ensure that it remains thoroughly mixed.

Does SedgeHammer need to be watered in?

Does SedgeHammer need to be watered in? No, for application on emerged and actively growing nutsedge, watering is not required. It is important that the SedgeHammer mixture completely cover the nutsedge until it glistens.

How many ounces are in a gallon of SedgeHammer?

10 Questions & Answers. Sedgehammer (1.33 oz bottle) comes with a measuring spoon. Each level spoon (0.9 g) of product is mixed to one gallon of water and 2 tsp of Non-Ionic Surfactant per gallon of water. Please refer to the product label for complete application instructions.

Does SedgeHammer kill all weeds?

Sedgehammer is a selective herbicide concentrate that targets a variety of stubborn, unwanted weeds including purple and yellow nutsedge, cocklebur, sunflowers, giant ragweed, pigweed, velvetleaf, and horsetail.

Does SedgeHammer need a surfactant?

Answer: The SedgeHammer 13.5 gram box already contains a surfactant so no additional surfactant would be needed. If you are using the 1.33 oz bottle of SedgeHammer, we would recommend using Non-Ionice Surfactant for Herbicides.

What temperature do you apply SedgeHammer?

Yes, temperatures can have an effect on the Sedgehammer. You should only apply the product when the plants are actively growing (cold temps can prohibit growth) and should not be applied when temps are over 85F to avoid damaging beneficial plants.

How long does it take SedgeHammer to dry?

SedgeHammer Herbicide is safe for people and pets once dry, when applied as directed on the product label. You should keep children and pets out of the treatment area while you are spraying SedgeHammer or any other herbicides or insecticides until the application is completely dry, usually 1-2 hours.

How long will SedgeHammer last once mixed?

Sedgehammer will last for up to 1 to 2 years when stored according to the product label. Store Sedgehammer in a cool, dry storage area. A 1-gallon mixture of Sedgehammer Plus will cover 1,000 square feet.

How long does it take for nutsedge killer to work?

Applying IMAGE® Herbicide is easy and requires little cleanup. You can use IMAGE® Kills Nutsedge for spot treatments with a trigger or pump up sprayer or treat large areas with a hose end sprayer. When using IMAGE, you should expect to see weed discoloration in 1 to 2 weeks and dead weeds in 3 to 5 weeks.

Article first time published on

Can you mix Sedgehammer with Roundup?

This product can be tank mixed with Glyphosate herbicide for application as a directed spray in landscaped or fallow areas.

What is a good surfactant for herbicides?

Dish soap is used as a surfactant, both when washing dishes and applying herbicide to plants.

Can I mix Sedgehammer and Celsius?

Absolutely nothing, unless you have nutsedge. Then you might tank mix some sedgehammer, image, or similar product.

How long does it take to see results from SedgeHammer?

Easy On Turf Sedgehammer can take a good 10-12 days to see results but rest assured, its working and it works well when it does.

Can you seed after SedgeHammer?

It is recommended that the grass be allowed to establish a good root system prior to applying SedgeHammer. If overseeding, wait a minimum of two weeks before applying. … For best results, do not mow for two days before or two days after spraying SedgeHammer.

Will SedgeHammer kill clover?

Answer: SedgeHammer Herbicide is only labeled to control kylinga, yellow, purple nutsedge and a small number of other weeds but it’s not labeled for clover.

Can you mix Quinclorac and Sedgehammer?

We recommend that you apply quinclorac separately from the small Sedgehammer packets since the Sedgehammer packet already contains a surfactant. Since quinclorac products generally require a more aggressive methylated seed oil surfactant, mixing these would cause extra stress on your desirable gras…

Can SedgeHammer be mix with other herbicides?

Answer: Yes, SedgeHammer Herbicide can be mixed and applied with 2, 4 D. 12 of 12 people found this answer helpful.

What is surfactant with SedgeHammer?

A nonionic surfactant is an additive that aids the penetration of Sedgehammer into the plant tissue. Surfactants are not only used in horticulture but are commonly used in many cleaning products. Their properties enable products to “sheet” or spread across a surface.

How much is a gallon of SedgeHammer?

Answer: You will need 1 scoop of SedgeHammer Herbicide per gallon of water.

Is Sedgehammer toxic to humans?

Major Health Hazards: irritating to eyes and skin, harmful if swallowed.

How do you get rid of nutgrass in a flower bed?

Spraying Nut Grass A postemergent herbicide, such as glyphosate, works as a spot treatment, soaking into the leaves and stems, and traveling through the root system, killing the entire plant. For nut grass application, a 1.5 percent mixture of 41 percent glyphosate works well.

Does SedgeHammer work on crabgrass?

Answer: SedgeHammer Herbicide is not labeled for crabgrass and may not provide adequate results for this weed. You can read page 4 of the SedgeHammer product label for a full list of the weeds this product will treat.

When should I spray for nutsedge?

Late spring/early summer (when it is young and actively growing) is the ideal time to control yellow nutsedge. During its early growth stages, yellow nutsedge has not started producing tubers and is most susceptible to control with herbicides.

How do I get rid of nutsedge naturally?

There is no perfect organic method for killing Nutsedge in your lawn, other than pulling them very carefully when they’re just starting to sprout in the Spring. Do this when the soil is moist and you can work to get the entire root including the little nutlet (you’ll know it when you see it).

How often can I spray nutsedge?

Label directions recommend applying Manage as soon as the weeds reach the three- to eight-leaf stage, prior to blooming. You often must reapply it six to 10 weeks later, once plants that have re-grown reach the same stage. You may even have to apply it again the next year.

How do you mix surfactant?

1. Mixing the surfactant with the herbicide in the same container, and apply them simultaneously to the plant.
2. Or spraying the target plant with the wetting agent first, and then applying the herbicide.

How much Dawn do you use as a surfactant?

Homemade Surfactant If nothing else is readily available when you’re ready to tackle those weeds, add 1 tablespoon of household dish detergent to 1 gallon of herbicide, says Purdue University Extension.

How do you make homemade surfactant?

Mix 2 tablespoons vegetable oil and 2 tablespoons mild liquid dish soap into 1 gallon of water. Pour the mixture into a spray bottle. While using, shake the bottle often to keep the ingredients well blended.

What can you mix with Celsius?

SPOT TREATMENT For spot treatments, mix 0.057-0.113 oz (1.6-3.2 g) of Celsius WG Herbicide per gallon and apply until weeds are wet. One gallon of spray solution will treat up to 1000 sq ft. For difficult-to-control weeds, such as Virginia buttonweed or dollarweed, make a second application when re-growth is observed.

Does Celsius need a surfactant?

It is recommended to use a non-ionic surfactant with Celsius.